|
|
|
Abstract Objective To evaluate the accuracy of a modified technique of measurement of the rotation alignment of the distal femur with the using of three dimensional(3D)construction.Methods Twenty two volunteers in Chongqing were enrolled in this research，including 11 men and 11 women，aging from 22 to 50 years old，average age is (32.55±18.33)years.Bilateral lower limb CT scan was done for each volunteer，and data were collected for following research.Firstly，the femoral mechanical axis was obtained，and two methods were used to measure the angles.One method is CT perpendicular to the femur mechanical axis，the other method is the modified 3D CT determination.The measurement of the posterior condylar angle(PCA)，the angle between CEA(clinical transepicondylar axis) and SEA(surgical transepiccondylar axis)，the condyle twist Angle(CTA) were done.Results Posterior condylar angle was (3.24±1.18)° in tomography determination group，and (3.26±1.23)° in 3D measurement group，(P＞0.05)；condyle torsion Angle value was (7.11±1.06)° in tomography determination group，and (7.15±1.13)° in 3D measurement group (P＞0.05)；surgical transepiccondylar axis and clinically transepicondylar axis Angle value was (3.85±0.43)° in tomography determination group，and (3.92±0.41)° in 3D measurement group (P＞0.05).There was no significant difference between the two methods in the same rotation angle.There was no significant difference between left and right angles，and no significant difference between male and female angles too.Conclusion Both tomography determination and 3D measurement can obtain accurate parameters of the rotation angle of the distal femur.
|
|
|
|
|
|
［1］Czurda T，Fennema P，Baumgartner M，et al.The association between component malalignment and post-operative pain following navigation-assisted total knee arthroplasty：results of a cohort/nested case-control study［J］.Knee Surg Sports Traumatol Arthrosc，2010，18(7)：863-869.
［2］Zhe Du，Shichang Chen，Mengning Yan，et al.Differences between native and prosthetic knees in terms of cross-sectional morphology of the femoral trochlea：a study based on three-dimensional models and virtual total knee arthroplasty［J］.BMC Musculoskelet Disord，2017(18)：166.
［3］孙辉红，陈益光，李晶，等.螺旋CT三维重建技术对股骨后髁角个体化测量的应用研究［J］.中国CT和MRI杂志，2012，10(5)：92-94.
［4］Hamidreza Yazdi，Ara Nazarian，John Y.Kwon，et al.Anatomical axes of the proximal and distal halves of the femur in a normally aligned healthy population：implications for surgery［J］.J Orthop Surg Res，2018(13)：21.
［5］Mehdi Moghtadaei，Javad Moghimi，Gholamreza Shahhoseini.Distal femur morphology of iranian population and correlation with current prostheses［J］.Iran Red Crescent Med J，2016，18(2)：e21818.
［6］覃承诃，裴国献，罗吉伟.股骨远端轴位X射线片对全膝关节假体置换术中股骨假体旋转力线的评估价值［J］.中国组织工程研究与临床康复，2007，11(16)：3124-3126.
［7］Fitdriyah Hussain，Mohammed Rafiq Abdul Kadir，Ahmad Hafiz Zulkifly，et al.Anthropometric measurements of the human distal femur：A study of the adult malay population［J］.Biomed Res Int，2013(2013)：175056.
［8］Mahmoud Jabalameli，Amin Moradi，Abolfazl Bagherifard，et al.Evaluation of distal femoral rotational alignment with spiral CT scan before total knee arthroplasty (A Study in Iranian population) ［J］.Arch Bone Jt Surg，2016，4(2)：122-127.
［9］孙振辉，刘军，张宇，等.CT扫描确定全膝关节置换股骨假体旋转力线的研究［J］.临床骨科杂志，2009，12(5)：501-503.
［10］蔡俊丰，袁锋，马敏，等.数字技术在个性化全膝关节置换股骨轴向力线控制中的应用［J/CD］.中华关节外科杂志电子版，2014，8(1)：91-95.
［11］Lee YS，Oh SH，Seon JK，et al.3D femoral neck anteversion measurements based on the posterior femoral plane in ORTHODOC system［J］.Med Biol Eng Comput，2006，44(10)：895-906.
［12］Xiao Jian Lin，Wang Chen Yu，Zhu Lan Yu.et al.Improved method for planning intramedullary guiding rod entry point in total knee arthroplasty［J］.Arch Orthop Trauma Surg，2014，134(5)：693-698.
［13］Berger RA，Rubash HE，Seel MJ，et al.Determining the rotational alignment of the femoral component in total knee arthroplasty using the epicondylar axis［J］.Clin Orthop Relat Res，1993(286)：40-47.
［14］Arima J，Whiteside LA，Mccarthy DS，et al.Femoral rotational alignment，based on the anteroposterior axis，in total knee arthroplasty in a valgus knee.A technical note［J］.J Bone Joint Surg (Am)，1995，77(9)：1331-1334.
［15］Dimitrios N.Lyras，Craig Loucks，Robert Greenhow.Analysis of the geometry of the distal femur and proximal tibia in the osteoarthritic knee：A 3D reconstruction CT scan based study of 449 cases［J］.Arch Bone Jt Surg，2016，4(2)：116-121.
［16］黄美贤，罗吉伟，胡罢生，等.三维螺旋CT重建股骨远端旋转力线的测量［J］.中国临床解剖学杂志，2008，26(1)：62-64.
［17］张建雷，陆声，梁金龙，等.基于连续断层CT扫描与三维重建技术的股骨远端旋转力线的测量［J］.中国骨科临床与基础研究杂志，2012，4(6)：411-416.
［18］Zeki Tasdemir，Hüseyin Bilgehan Çevik，Nurzat Elmal₁，et al.Consistency between posterior condylar axis (+3° external rotation) line and clinical transepicondylar axis line in primary total knee arthroplasty［J］.Orthop J Sports Med，2017，5(2 suppl2)：2325967117S00104.
［19］Fabricio Bolpato Loures，Sebastio Furtado Neto，Robson de Lima Pinto，et al.Rotational assessment of distal femur and its relevance in total knee arthroplasty：analysis by magnetic resonance imaging［J］.Radiol Bras，2015，48(5)：282-286.
［20］Olcott CW，Scott RD.The Ranawat award.Femoral component rotation during total knee arthroplasty［J］.Clin Orthop Relat Res，1999(367)：39-42.
［21］潘江，曲铁兵，温亮，等.汉族人群正常股骨远端旋转对线的研究及其临床意义［J］.中华骨科杂志，2014，34(4)：387-393. |
| [1] |
. [J]. sygkzz, 2021, 27(4): 366-370. |
|
|
|
���������� 14010702070875��