Abstract:Objective To explore the clinical effect of 3D printing in the treatment of adult developmental dysplasia of the hip(DDH) with total hip arthroplasty(THA).Methods From January,2013 to June,2016,20 patients were diagnosed as DDH in the First Affiliated Hospital of Kunming Medical University.There were 2 cases of Crowe Ⅰ,2 cases of Crowe Ⅱ,8 cases of Crowe Ⅲ,8 cases of Crowe Ⅳ.All patients underwent spiral CT scanning,and the hip 3D model were calculated to produce a large hip joint model with entity 1︰1.According to print out the corresponding hip model,we developed a suitable surgical program.The general condition,complications and the patient’s hip function (activity,pain VAS score,Harris Hip Score(HHS)) were recorded.Results 20 patients were diagnosed as DDH.The mean operative time was (75.25±20.42) min and the patient could stand and walk (2.90±0.72) d after operation.The average length of stay was (15.35±5.95)d.The mean HHS was (51.30±8.02) before the surgery and (86.50±5.85) at the last follow-up(P<0.001).The VAS score was (5.51±1.19) before the surgery and (1.05±0.88) at last follow-up (P<0.001).All patients were followed up with no complications such as joint infection,prosthetic loosening,fracture,prosthetic dislocation,sciatic nerve injury and other complications recorded.Conclusion 3D print technology was efficient in the treatment of hip dysplasia in patients,especially Crowe Ⅲ/ Ⅳ patients.
杨清,杨毅,杨柳,张正学,龚跃昆,杨佳,溪应龙,段于平,李彪. 3D打印技术用于人工全髋关节置换术治疗成人DDH的临床应用[J]. 实用骨科杂志, 2017, 23(8): 693-697.
Yang Qing,Yang Yi,Yang Liu,et al. Clinical Application of 3D Printing Technique in the Treatment of Developmental Dysplasia of the Hip in Total Hip Arthroplasty. sygkzz, 2017, 23(8): 693-697.
[1]李梁涛,谷贵山.人工关节置换治疗成人髋关节发育不良的新进展[J].实用骨科杂志,2012,18(6):523-526.
[2]Kiyak G,Bezer M,Ketenci IE,et al.Total hip arthroplasty without femoral osteotomy in patients who had high and low dislocation due to developmental dysplasia of the hip[J].Hip Int,2016,26(2):193-198.
[3]赵云宏,杨毅,李彪,等.生物型人工全髋关节置换术治疗Crowe Ⅲ型成人髋关节发育不良的疗效观察[J].中国修复重建外科杂志,2016,30(8):947-950.
[4]李军,马保安,胡运生,等.发育性髋关节发育不良的外科治疗分析[J].西北国防医学杂志,2009,30(2):97-98.
[5]Wang D,Li LL,Wang HY,et al.Long-term results of cementless total hip arthroplasty with subtrochanteric shortening osteotomy in crowe type Ⅳ developmental dysplasia[J].J Arthroplasty,2016,11(12):12-19.
[6]孙西虎,赵建军,张圣军.成人髋臼发育不良的诊断及治疗进展[J].创伤外科杂志,2015,17(2):185-187.
[7]Mao Y,Xu C,Xu J,et al.The use of customized cages in revision total hip arthroplasty for Paprosky type Ⅲ acetabular bone defects[J].Int Orthop,2015,39(10):2023-2030.
[8]官建中,刘亚军,吴敏,等.3D打印技术在成人DDH人工全髋关节置换术中的临床应用研究[J].中华全科医学,2016,14(7):1080-1082.
[9]蒋明辉,蔡立宏,雷青,等.3D打印技术在骨科临床的应用研究及展望[J].中华损伤与修复杂志(电子版),2016,11(4):288-290.
[10]李彪,郭双红,龚跃昆,等.股骨转子下叠加截骨的人工全髋关节置换术治疗CroweⅣ型成人发育性髋关节发育不良[J].中国修复重建外科杂志,2013,27(6):645-647.
[11]Chen M,Luo ZL,Wu KR,et al.Cementless total hip arthroplasty with a high hip center for hartofilakidis type B developmental dysplasia of the hip:results of midterm follow-up[J].J Arthroplasty,2016,31(5):1027-1034.
[12]郑祖高,陈宣煌,陈国仙,等.数字化设计及3D打印技术在人工全膝关节置换术中的应用研究[J].中国医药科学,2016,6(20):11-15.
[13]Anderl W,Pauzenberger L.The MyKnee(R) patient-specific system.Rationale,technique and results[J].Orthopade,2016,45(4):294-301.
[14]Wyatt MC.Custom 3Dprinted acetabular implants in hip surgery-innovative breakthrough or expensive bespoke upgrade?[J].Hip Int,2015,25(4):375-379.
[15]Beckmann J,Steinert C,Zilkens A,et al.Partial replacement of the knee joint with patient-specific instruments and implants[J].Orthopade,2016,45(4):322-330.
[16]Calliess T,Ettinger M,Stukenborg C,et al.Custom-fit kinematic alignment in total knee arthroplasty using PSI.The story of ShapeMatch technology[J].Orthopade,2016,45(4):314-321.
[17]Fuller SM,Butz DR,Vevang CB,et al.Application of 3-dimensional printing in hand surgery for production of a novel bone reduction clamp[J].J Hand Surg Am,2014,39(9):1840-1845.
[18]Koster G,Biro C.Total and unicompartmental knee replacement.Patient-specific Instrumentation[J].Orthopade,2016,45(4):302-313.
[19]Muller PE,Jansson V.A miniaturised actuation system embedded in an instrumented knee implant for postoperative ligament imbalance correction[J].Biomed Res Int,2014(2014):6211-6214.
[20]Schroder C,Steinbruck A,Muller M,et al.Rapid prototyping for in vitro knee rig investigations of prosthetized knee biomechanics:comparison with cobalt-chromium alloy implant material[J].2015,15(6):135-142.
[21]Steinert AF,Holzapfel BM,et al.Total knee arthroplasty.Patient-specific instruments and implants[J].Orthopade,2016,45(4):331-340.
[22]Tibesku CO.Total knee arthroplasty with the use of patient specific instruments.The Visionaire System[J].Orthopade,2016,45(4):286-293.
[23]杨龙,王建吉,刘国勇,等.3D打印技术在髋臼发育不良髋关节置换中的初步应用[J].中国矫形外科杂志,2016,24(17):1550-1553.
[24]赵坤,段宜强.3D打印技术在成人DDH全髋置换术中的应用[J].黔南民族医专学报,2015,28(4):245-253.
[25]Mu D,Yang B,Xu A.Midterm outcome of cementless total hip arthroplasty in Crowe Ⅳ hartofilakidis type Ⅲ developmental dysplasia of the hip[J].J Arthroplasty,2016,31(3):668-675.
[26]Sugano N,Noble PC,Kamaric E,et al.The morphology of the femur in developmental dysplasia of the hip[J].J Bone Joint Surg(Br),1998,80(4):711-719.
[27]魏瑄,宋树春,邹士平.全髋关节置换治疗成人髋关节发育不良临床研究[J].医药论坛杂志,2008,29(22):51-52.