髋臼外缘缺损对髋臼假体初始稳定性影响的有限元研究

摘要
图/表
参考文献
相关文章 (2)

全文: PDF (2007 KB) HTML (1 KB)
输出: BibTeX | EndNote (RIS)

摘要目的通过三维有限元方法探索行全髋关节置换术中生物型臼杯置入时初始稳定的髋臼缺损临界条件。方法利用计算机软件重建骨盆三维模型，设计不同的髋臼外缘缺损，并分别对不同的缺损模型进行力学加载，计算出不同缺损模型下髋臼杯的覆盖率以及臼杯相对宿主骨的临界微动位移。结果当α＝－25 °时，臼杯相对宿主骨的最大微动位移为39 μm，髋臼覆盖率为67.1%，此时达到臼杯稳定的临界值。结论采用生物性假体进行全髋关节置换术时，在无额外固定条件下，应保持髋臼杯骨覆盖率不低于67.1%，以保证正常步态下置入髋臼杯的初始稳定性。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	顾彬
	王跃

关键词 ：髋臼缺损, 臼杯, 三维有限元, 微动位移

Abstract：Objective To explore the critical condition of initial stable acetabular defect in total hip arthroplasty (THA) by using three-dimensional finite element method.Methods The three-dimensional pelvic model was reconstructed by computer software，and different external defects of acetabulum were designed.The coverage rate of acetabulum cup under different defect models and the critical frettage displacement of acetabulum cup relative to host bone were calculated.Results When α=－25 °，the maximum displacement of acetabulum relative to host bone was 39 μm，〖JP〗and the acetabulum coverage was 67.1%，which reached the critical value of acetabulum stability.Conclusion During total hip replacement with biological prosthesis，the bone coverage of the acetabular cup should be maintained at least 67.1% without additional fixation to ensure the initial stability of the acetabular cup implantation with normal gait.

Key words： acetabular defect acetabular cup three-dimensional finite element micro-displacement

通讯作者: 王跃

作者简介: 顾彬(1990－ )，男，主治医师，三六三医院骨科，3864096212@qq.com

引用本文:

顾彬，王跃. 髋臼外缘缺损对髋臼假体初始稳定性影响的有限元研究[J]. 实用骨科杂志, 2024, 30(4): 322-.
Gu Bin，Wang Yue. Finite Element Study on the Effect of Acetabular External Edge Defect on the Initial Stability Of Acetabular Prosthesis. sygkzz, 2024, 30(4): 322-.

链接本文:

http://www.sygkzz.com/CN/ 或 http://www.sygkzz.com/CN/Y2024/V30/I4/322

［1］Murphy SB，Ganz R，Muller ME.The prognosis in untreated dysplasia of the hip.A study of radiographic factors that predict the outcome［J］.J Bone Joint Surg(Am)，1995，77(7)：985-989.
［2］Fujii M，Nakashima Y，Nakamura T，et al.Minimum lateral bone coverage required for securing fixation of cementless acetabular components in hip dysplasia［J］.Biomed Res Int，2017(2017)：4937151.
［3］Bobak P，Wroblewski BM，Siney PD，et al.Charnley low-friction arthroplasty with an autograft of the femoral head for developmental dysplasia of the hip.The 10 to 15 years results［J］.J Bone Joint Surg(Br)，2000，82(4)：508-511.
［4］Lakstein D，Tan Z，Oren N，et al.Preoperative planning of total hip arthroplasty on dysplastic acetabuli［J］.Hip Int，2017，27(1)：55-59.
［5］Zhang Z，Wu P，Huang Z，et al.Cementless acetabular component with or without upward placement in dysplasia hip：Early results from a prospective，randomised study［J］.J Orthop，2017，14(3)：370-376.
［6］Garvin KL，Bowen MK，Salvati EA，et al.Long-term results of total hip arthroplasty in congenital dislocation and dysplasia of the hip.A follow-up note［J］.J Bone Joint Surg(Am)，1991，73(9)：1348-1354.〖JP〗
［7］Hsu JT，Lai KA，Chen Q，et al.The relation between micromotion and screw fixation in acetabular cup［J］.Comput Methods Programs Biomed，2006，84(1)：34-41.
［8］Zivkovic I，Gonzalez M，Amirouche F.The effect of under-reaming on the cup/bone interface of a press fit hip replacement［J］.J Biomech Eng，2010，132(4)：41008.
［9］Bergmann G，Deuretzbacher G，Heller M，et al.Hip contact forces and gait patterns from routine activities［J］.J Biomech，2001，34(7)：859-871.
［10］Wasielewski RC，Cooperstein LA，Kruger MP，et al.Acetabular anatomy and the transacetabular fixation of screws in total hip arthroplasty［J］.J Bone Joint Surg(Am)，1990，72(4)：501-508.
［11］程兴旺，兰平文，沈彬，等.成人髋关节高位脱位全髋关节置换术后髋臼三维有限元分析［J］.四川大学学报(医学版)，2013，44(5)：787-791.
［12］Ranawat CS，Dorr LD，Inglis AE.Total hip arthroplasty in protrusio acetabuli of rheumatoid arthritis［J］.J Bone Joint Surg(Am)，1980，62(7)：1059-1065.
［13］Duchemin L，Bousson V，Raossanaly C，et al.Prediction of mechanical properties of cortical bone by quantitative computed tomography［J］.Med Eng Phys，2008，30(3)：321-328.
［14］卢子兴，裴鹤.各向异性松质骨压缩模量和强度的数值预测［J］.中国生物医学工程学报，2010，29(3)：468-472.
［15］Engh CA，O'Connor D，Jasty M，et al.Quantification of implant micromotion，strain shielding，and bone resorption with porous-coated anatomic medullary locking femoral prostheses［J］.Clin Orthop Relat Res，1992(285)：13-29.
［16］Xu J，Qu X，Li H，et al.Three-dimensional host bone coverage in total hip arthroplasty for crowe types Ⅱ and Ⅲ developmental dysplasia of the hip［J］.J Arthroplasty，2017，32(4)：1374-1380.
［17］Ueno T，Kabata T，Kajino Y，et al.Three-dimensional host bone coverage required in total hip arthroplasty for developmental dysplasia of the hip and its relationship with 2-dimensional coverage［J］.J Arthroplasty，2019，34(1)：93-101.
［18］Wen X，Zuo J，Liu T，et al.Bone defect map of the true acetabulum in hip dysplasia (Crowe type Ⅱ and Ⅲ) based on three-dimensional image reconstruction analysis［J］.Sci Rep，2021，11(1)：22955.
［19］Kaku N，Tabata T，Tsumura H.Influence of cup-center-edge angle on micro-motion at the interface between the cup and host bone in cementless total hip arthroplasty：Three-dimensional finite element analysis［J］.Eur J Orthop Surg Traumatol，2015，25(8)：1271-1277.
［20］Thaler M，Khosravi I，Putzer D，et al.Return to sports after total hip arthroplasty：A survey among members of the european hip society［J］.J Arthroplasty，2021，36(5)：1645-1654.
［21］Lewinnek GE，Lewis JL，Tarr R，et al.Dislocations after total hip-replacement arthroplasties［J］.J Bone Joint Surg(Am)，1978，60(2)：217-220.
［22］Kaku N，Tabata T，Tagomori H，et al.The mechanical effects of cup inclination and anteversion angle on the bearing surface［J］.Eur J Orthop Surg Traumatol，2018，28(1)：65-70.
［23］郑美亮，李克鹏，帖小佳，等.假体放置角度对髋关节置换术治疗髋关节骨性融合的疗效及影响因素［J］.局解手术学杂志，2023，32(12)：1063-1067.
［24］刘志强，梁玉瑶，高阁，等.表面处理技术对人工关节摩擦磨损性能的影响［J］.中国组织工程研究，2022，26(10)：1604-1160.