|
|
|
| Finite Element Analysis of Different Screw Path after Femoral Neck Fracture Healing |
1.First Clinical Medical of Guangzhou Chinese Medicine University
2.Department of Trauma Orthopedic，The First Affiliated Hospital of Guangzhou Chinese Medicine University |
|
|
|
|
Abstract Objective To investigate the stress distribution of different screw path of proximal femur after femoral neck fracture healing with removal of cannulated screws so as to provide theoretical reference for rehabilitation and prevention of complications after surgery.Methods Dimensional finite element model of the human proximal femur was reconstructed by 64-slice spiral CT scan.Finite element model of equilateral triangle and inverted triangle screw path were established respectively.Under the same load and constraint，the von stresses of the femural in different models were compared by the finite element analysis.Results The maximum von stress were concentrated in the region of calcar under the femoral neck.The maximum von stress of equilateral triangle model (11.02 MPa) was much larger than inverted triangle model(10.82 MPa) and normal proximal femur model (10.58 MPa).Conclusion The stress of femur neck would increase significantly after equilateral triangle screws were removed.It was needed to pay close attention to risk of femoral neck fracture when did rehabilitation and functional exercises after surgery.
|
|
|
|
Corresponding Authors:
Huang Feng
|
|
|
|
［1］Zielinski SM，Heetveld MJ，Bhandari M，et al.Implant Removal After Internal Fixation of a Femoral Neck Fracture：Effects on Physical Functioning［J］.J Orthop Trauma，2015，29(9)：285-292.
［2］Busam ML，Esther RJ，Obremskey WT.Hardware removal：indications and expectations［J］.J Am Acad Orthop Surg，2006，14(2)：113-120.
［3］Tada S，Stegaroiu R，Kitamura E，et al.Influence of implant designand bone quality on stress/strain distribution in bone around implants：a 3-dimensional finite element analysis［J］.Int J Oral Maxillofac Impants，2003，18(3)：357-368.
［4］Jiong M，Shi WL，Guang YJ，et al.Finite element analysis of the effect of cannulated screw placement and drilling frequency on femoral neck fracture fixation［J］.Injury，2014，45(12)：2045-2050.
［5］Yang JJ，Lin LC，Chao KH，et al.Risk factors for nonunion in patients with intracapsular femoral neck fractures treated with three cannulated screws placed in either a triangle or an inverted triangle configuration［J］.J Bone Joint Surg(Am)，2013，95(1)：61-69.
［6］庞忠训，彭方敏.青壮年股骨颈骨折内固定取出后股骨头坏死的临床分析［J］.中国矫形外科杂志，2012，20(14)：1335-1336.
［7］Eberle S，Wutte C，Bauer C，et al.Evaluation of risk for secondary fracture after removal of a new femoral neck plate for intracapsular hip fractures［J］.J Orthop Trauma，2011，12(25)：721-725. |
|
|
|
���������� 14010702070875��